There are some ways in which you can customize the programming for the water softener. Take a look at the options below and check out the articles to learn more.
Salt Efficiency
Check out our article 'E' Efficiency Setting to learn what the setting does and how to activate it.
Clean Feature
Check out our article How to Activate the Clean Feature to learn what it is and how to turn it on.
Maximum Days Between Recharges
Check out our article How to Set the Maximum Days Between Recharges to learn why it's important and how to program it.
97% Feature (on selected models)
This feature allows the softener to regenerate anytime it reaches 97% softening capacity. This means it may trigger a recharge at times other than what you have set for the 'Recharge Time'. By turning this feature ON, you may save on salt and water usage.
Hold the Select button until '000' appears, then let go. Tap Select until you see 97 on the screen. Turn it ON by pressing the Up arrow on the display.
12/24 Hour Clock
Hold the Select button until '000' appears, then let go. Tap Select until you see '12 or 24 hr' on the screen. It should automatically be set at 12 hr (1 -12am, 1 - 12pm). If you want the 24 hour format, press the up button to have '24 hr' shown on the screen. Then press Select to move on.
Backwash and Rinse Times
The Backwash and Rinse cycles are designed to flush your resin beads of any leftover salt, hardness minerals, and debris. These times are often customized by homeowners with a water source high in iron or sediment.
The default backwash time is 13 minutes and fast rinse time is 6 minutes. If you prefer, you can increase or decrease these times between 1 - 30 minutes.
Press and hold the Select button until '000' shows up on the screen. Then tap the Select button until you see 'bA-' on screen. Use the up/down arrows to change the time for the backwash first, then push Select and use the up/down arrows to change the fast rinse time. Then tab 'Select' until you are back on the home screen with the current time.
Auxiliary Output Control (on selected models)
This feature is for water treatment professionals who are setting up external equipment, like a chlorine generator or chemical feeder. Check out the article iQua Aux Control Type to learn more.