1. Plug the power supply into the outlet. You will hear a beep, followed by a few brief model codes. Next, the screen will show 'Present Time':
2. Present Time - set the current time using Up/Down arrows. Press Select to confirm.
3. Days Between Recharges - set this using the Up/Down arrows and the chart below. Press Select to confirm.
4. Recharge Time - use the Up/Down arrows to set this for a time of day when water is not being used in the household. If there is another filter or softener installed, be sure to offset the recharge times. Press Select to confirm.
Return to the Tank Filter Installation instructions if needed.